Quickseam Corner Flashing is a 216 mm in diameter round piece of uncured EPDM factory laminated to QuickSeam Tape. It is designed to flash outside corners or to be used as a cover patch for repairs where appropriate.
- EPDM surfaces and>or mating surfaces must be prepared with QuickPrime Plus, using a QuickScrubber tool.
- Use of other products is not allowed.
- Restore the product to room temperature prior to use if exposed to temperatures below 15°C for prolonged periods.
- On cold days with ambient temperature below 5°C, the use of a heat gun is recommended to warm the Quickseam Corner Flashing and to ensure good formability.
- On normal days, preheating of the product is not necessary.
- One piece per corner.