Firestone Quickseam Pipe Flashing
Quickseam pipe flashings are specifically designed to be used in roofing applications for flashing of round penetrations. Quickseam Pipe Flashings will fit various penetrations and must be cut to correct pipe diameter before installation. This flashing can be used on pipes up to 6 inches wide
Quickseam Pipe Flashings may be used to flash penetrations for both EPDM as well as APP and SBS Modified Bitumen systems.
Method Of Application
Penetration must be clean of prior flashing and foreign materials. Cut along the top edge of the ring on the Quickseam Pipe Flashing corresponding to the size of the pipe. Install the Pipe Flashing, clamping ring and lap sealant.